सहाय्य:Convert

विकिपीडिया, मुक्‍त ज्ञानकोशातून
Jump to navigation Jump to search

साचा:Wikipedia how to Template {{convert}} is used to convert a value from one unit of measurement to another. This page provides an overview of the options available when using the template.

प्रश्न विचारणे[संपादन]

एकके/Units[संपादन]

/जलद सुरुवातQuick start[संपादन]

By default, the name of the input unit is shown, while the output is abbreviated using the unit's symbol. If wanted, names or symbols can be used, and the output precision can be specified.

  • {{convert|123.4|ft|m}} → १२३.४ फूट (३७.६ मी)
  • {{convert|123.4|ft|m|abbr=on}} → १२३.४ फूट (३७.६ मी)
  • {{convert|123.4|ft|m|abbr=off}} → १२३.४ फूट (३७.६ मीटर)
  • {{convert|123.4|ft|m|abbr=off|sp=us}} → १२३.४ फूट (३७.६ मीटर)
  • {{convert|123.4|ft|m|0}} → १२३.४ फूट (३८ मी)
  • {{convert|123.4|ft|m|3}} → १२३.४ फूट (३७.६१२ मी)

To avoid overlinking, units are not normally linked, but they can be when needed.

  • {{convert|12300|m2|rood|abbr=off|lk=on}} → १२,३०० चौरस मीटर (१२.२ rood)
  • {{convert|12300|m2|rood|abbr=off|lk=out}} → १२,३०० चौरस मीटर (१२.२ rood)

A convert can be used in an adjectival phrase, and user-specified text can be inserted.

  • {{convert|1500|ft|m|adj=on}} → १,५००-फूट (४६० मी)
  • {{convert|1500|ft|m|adj=mid|-long}} → १,५००-फूट-long (४६० मी)

If no output unit is specified, a default is used.

  • {{convert|123.4|ft}} → १२३.४ फूट (३७.६ मी)
  • {{convert|123.4|ft|abbr=on}} → १२३.४ फूट (३७.६ मी)
  • {{convert|1500|ft||adj=mid|-long}} → १,५००-फूट-long (४६० मी)

The last example used || to explicitly show that the output unit has been omitted. If that is not done, the result is an error, and holding the mouse over the error message shows that "-long" is misinterpreted as the output unit.

The input and outputs can be "flipped". When flipped, an option such as |lk=out means "link the right-hand side".

  • {{convert|12300|m2|rood|abbr=off|lk=out}} → १२,३०० चौरस मीटर (१२.२ rood)
  • {{convert|12300|m2|rood|abbr=off|lk=out|order=flip}} → १२.२ rood (१२,३०० चौरस मीटर)
  • {{convert|12300|m2|rood|abbr=off|lk=in|order=flip}} → १२.२ rood (१२,३०० चौरस मीटर)

The input value can be spelled.

  • {{convert|5|mi|km|spell=in|0}} → ५ मैल (८ किमी)
  • {{convert|5|mi|km|spell=In|0}} → ५ मैल (८ किमी)

Ranges of values are supported.

  • {{convert|3|-|6|ft}} → ३–६ फूट (०.९१–१.८ मी)
  • {{convert|3|to|6|ft|abbr=off|sp=us}} → ३ to ६ फूट (०.९१ to १.८ मीटर)

A range can use more than two values.

  • {{convert|100|x|120|x|210|mm|in}} → १०० by १२० by २१० मिलीमीटर (३.९ × ४.७ × ८.३ इंच)
  • {{convert|100|x|120|x|210|mm|in|abbr=on}} → १०० × १२० × २१० मिमी (३.९ × ४.७ × ८.३ इंच)
  • {{convert|100|by|120|by|210|mm|in}} → १०० by १२० by २१० मिलीमीटर (३.९ by ४.७ by ८.३ इंच)

Some input units consist of multiple components.

  • {{convert|5|ft|8|in}} → ५ फूट ८ इंच (१.७३ मी)
  • {{convert|11|st|3|lb|kg}} → ११ stone ३ पौंड (७१ किलो)

An output can be a combination of several units.

  • {{convert|123|nmi|km mi}} → १२३ nautical mile (२२८ किमी; १४२ मैल)
  • {{convert|123|hPa|psi inHg|abbr=on|lk=on}}रुपांतरण त्रूटी: "psi inHg" एकक अनोळखी आहे

Some outputs consist of multiple units.

  • {{convert|123.4|m|ydftin}} → १२३.४ मीटर (१३४ यार्ड २ फूट १० इंच)
  • {{convert|123.4|kg|stlb}} → १२३.४ किलोग्रॅम (१९ st ६ पौंड)

Rounding[संपादन]

By default, the output value is rounded to adjust its precision to match that of the input. An input such as 1234 is interpreted as 1234 ± 0.5, while 1200 is interpreted as 1200 ± 50, and the output value is displayed accordingly, taking into account the scale factor used in the conversion.

If the default is not wanted, the precision of output values can be specified using:

  • |N (where N is a number) to specify the number of digits to be displayed after the decimal mark (round output to N decimal places).
  • |-N (where -N is a negative number) to specify the number of digits before the decimal mark that should be replaced with zero (round output to nearest 10N).
  • |sigfig=N (where N is a positive number) to specify the number of significant digits (round output to N significant figures).
  • |round=5 to round the output to the nearest multiple of 5. The round value can be 0.5, 5, 10, 25 or 50.

Examples:

  • {{convert|1234|ft|m}} → १,२३४ फूट (३७६ मी)
  • {{convert|1234|ft|m|2}} → १,२३४ फूट (३७६.१२ मी)
  • {{convert|1234|ft|m|-1}} → १,२३४ फूट (३८० मी)
  • {{convert|1234|ft|m|round=5}} → १,२३४ फूट (३७६ मी)
  • {{convert|1234|ft|m|round=10}} → १,२३४ फूट (३७६ मी)
  • {{convert|1234|ft|m|round=25}} → १,२३४ फूट (३७६ मी)
  • {{convert|1234|ft|m|round=50}} → १,२३४ फूट (३७६ मी)
  • {{convert|1234|ft|m|sigfig=2}} → १,२३४ फूट (३८० मी)
  • {{convert|1234|ft|m|sigfig=4}} → १,२३४ फूट (३७६.१ मी)
  • {{convert|1230|ft|m}} → १,२३० फूट (३७० मी)
  • {{convert|1230|ft|m|0}} → १,२३० फूट (३७५ मी)
  • {{convert|1230|ft|m|1}} → १,२३० फूट (३७४.९ मी)
  • {{convert|5670|sqft}} → ५,६७० चौरस फूट (५२७ मी)
  • {{convert|5670|sqft|-2}} → ५,६७० चौरस फूट (५०० मी)
  • {{convert|7x8x12|ft|abbr=on|round=0.5}}रुपांतरण त्रूटी: मूल्य "7x8x12" अंकातच आवश्यक आहे

An input value such as 5000 is assumed to have one significant figure, while 5001 has four. If wanted, "5000." can be used to specify an input number that has four significant figures.

  • {{convert|5000|m}} → ५,००० मीटर (१६,००० फूट)
  • {{convert|5000.|m}} → ५,०००. मीटर (१६,४०४ फूट)

Spell[संपादन]

Use US (en-US) spelling for unit names

Use |sp=us to specify that unit names should be displayed with US spelling:

  • {{convert|6|km}} → ६ किलोमीटर (३.७ मैल)
  • {{convert|6|km|sp=us}} → ६ किलोमीटर (३.७ मैल)
Spell out numbers in words

Use |spell=in to specify that the input value should be spelled in words, or |spell=In (uppercase "I") to start with an uppercase letter:

  • {{convert|5|mi|km|spell=in}} → ५ मैल (८.० किमी)
  • {{convert|5|mi|km|spell=in|abbr=off|0}} → ५ मैल (८ किलोमीटर)
  • {{convert|5|mi|km|spell=In|0}} → ५ मैल (८ किमी)
  • {{convert|5|mi|km|spell=In|abbr=off|0}} → ५ मैल (८ किलोमीटर)
  • {{convert|2+1/4|mi|km|abbr=off|0|spell=In}} मैल (४ किलोमीटर)
  • {{convert|2+1/4|mi|km|abbr=off|0|spell=In|sp=us}} मैल (४ किलोमीटर)

The input and output can be "flipped", as shown in these examples. Logically, the resulting first number is spelled:

  • {{convert|5|mi||0|order=flip|spell=in}} → ८ किलोमीटर (५ मैल)
  • {{convert|5|mi||0|order=flip|spell=In|abbr=off}} → ८ किलोमीटर (५ मैल)

The "||" provides an empty output unit to mean "use the default".

Both input and output values can be spelled:

  • {{convert|5|mi|m|-2|spell=on|sp=us|abbr=off}} → ५ मैल (८,००० मीटर)
  • {{convert|5|mi|m|-2|spell=On|sp=us|abbr=off}} → ५ मैल (८,००० मीटर)

Thousands separator[संपादन]

Commas in input numbers are ignored. Gaps are not allowed in input.

In output, by default, the thousands separator is the comma:

  • {{convert|1234567|m|ft}} → १२,३४,५६७ मीटर (४०,५०,४१७ फूट)
  • {{convert|1,234,567|m|ft}} → १२,३४,५६७ मीटर (४०,५०,४१७ फूट)

Set |comma=off to remove separators from the result:

  • {{convert|1,234,567|m|ft|comma=off}} → १२,३४,५६७ मीटर (४०,५०,४१७ फूट)

Setting |comma=5 adds a separator only when the number of digits is 5 or more:

  • {{convert|1234|m|ft}} → १,२३४ मीटर (४,०४९ फूट)
  • {{convert|1234|m|ft|comma=5}} → १२३४ मीटर (४०४९ फूट)
  • {{convert|12345|m|ft|comma=5}} → १२,३४५ मीटर (४०,५०२ फूट)

Set |comma=gaps to use a small space for thousands grouping. If the resulting number is copied, only the digits are copied (the gaps are omitted).

  • {{convert|1234567|m|ft}} → १२,३४,५६७ मीटर (४०,५०,४१७ फूट)
  • {{convert|1234567|m|ft|comma=gaps}}१२३४५६७ मीटर (४०५०४१७ फूट)

Gaps are inserted on both sides of the decimal mark. However, by default, no gap is inserted before a single digit. If a gap is always wanted, |comma=gaps3 can be used.

  • {{convert|1234.98765|m|ft|comma=gaps}}२३४.९८७६५ मीटर (०५१.७९६८ फूट)
  • {{convert|1234.98765|m|ft|comma=gaps3}} → १,२३४.९८७६५ मीटर (४,०५१.७९६८ फूट)
  • {{convert|1234.9876|m|ft|comma=gaps}}२३४.९८७६ मीटर (०५१.७९७ फूट)
  • {{convert|1234.9876|m|ft|comma=gaps3}} → १,२३४.९८७६ मीटर (४,०५१.७९७ फूट)
  • {{convert|1.2349876|m|ft|comma=gaps}} → १.२३४९८७६ मीटर (४.०५१७९७ फूट)
  • {{convert|1.2349876|m|ft|comma=gaps3}} → १.२३४९८७६ मीटर (४.०५१७९७ फूट)

Fractions[संपादन]

An input value can be specified as a fraction.

  • {{convert|1/2|in|mm|1}} इंच (१२.७ मिमी)
  • {{convert|1/2|in|mm|1|adj=on}}-इंच (१२.७ मिमी)
  • {{convert|2+1/2|in|mm|1}} इंच (६३.५ मिमी)
  • {{convert|-2-1/4|in|mm|1}}−२ इंच (−५७.२ मिमी)
  • {{convert|1/2|in|mm|1|spell=in}} इंच (१२.७ मिमी)

If two slashes are used, a horizontal fraction bar is used.

  • {{convert|1//2|in|mm|1}}/ इंच (१२.७ मिमी)
  • {{convert|2+1//2|in|mm|1}} / इंच (६३.५ मिमी)

An output can be expressed with a fraction using |frac=N where N is the denominator. For example, |frac=8 rounds the output to the nearest eighth.

  • {{convert|219|mm|in|abbr=on}} → २१९ मिमी (८.६ इंच)
  • {{convert|219|mm|in|abbr=on|frac=2}} → २१९ मिमी (८.६ इंच)
  • {{convert|219|mm|in|abbr=on|frac=4}} → २१९ मिमी (८.६ इंच)
  • {{convert|219|mm|in|abbr=on|frac=8}} → २१९ मिमी (८.६ इंच)
  • {{convert|222|mm|in|abbr=on|frac=8}} → २२२ मिमी (८.७ इंच)

A fraction is applied to the output unit (if there is only one), or to non-SI units (if using a combination), except that if a precision is also specified, the fraction only applies to the hand unit.

Joins[संपादन]

The |disp= ("display") option may be used to "join" the input and output, as shown in the following examples.

Convert Output Description
{{convert|2.4|m|ft}} २.४ मीटर (७.९ फूट) default
{{convert|2.4|m|ft|disp=b}} २.४ मीटर (७.९ फूट) brackets (same as default)
{{convert|2.4|m|ft|disp=sqbr}} २.४ मीटर [७.९ फूट] square brackets
{{convert|2.4|m|ft|disp=or}} २.४ मीटर or ७.९ फूट or
{{convert|2.4|m|ft|disp=comma}} २.४ मीटर, ७.९ फूट comma
{{convert|2.4|m|ft|disp=br}} २.४ मीटर
७.९ फूट
"<br />", line break

Ranges[संपादन]

A range of values can be specified, as shown in the following examples.

Separator Convert Result Notes
- {{convert|3|-|6|ft}} ३–६ फूट (०.९१–१.८ मी) Input can be hyphen (-) or en dash (–), output uses en dash
and {{convert|3|and|6|ft}} ३ and ६ फूट (०.९१ and १.८ मी)
and(-) {{convert|3|and(-)|6|ft}} ३ and ६ फूट (०.९१ and १.८ मी) and on left; en dash on right
and(-)|order=flip {{convert|3|and(-)|6|ft|order=flip}} ०.९१ and १.८ मीटर (३ and ६ फूट)
or {{convert|3|or|6|ft}} ३ or ६ फूट (०.९१ or १.८ मी)
to {{convert|3|to|6|ft}} ३ to ६ फूट (०.९१ to १.८ मी)
to(-) {{convert|3|to(-)|6|ft}} ३ to ६ फूट (०.९१–१.८ मी) to on left; en dash on right
to(-)|order=flip {{convert|3|to(-)|6|ft|order=flip}} ०.९१ to १.८ मीटर (३–६ फूट)
to about {{convert|3|to about|6|ft}} ३ to about ६ फूट (०.९१ to about १.८ मी)
+/- {{convert|3|+/-|6|ft}} ३ ± ६ फूट (०.९१ ± १.८ मी)
+/-± &plusmn; {{convert|3|±|6|ft}} ३ ± ६ फूट (०.९१ ± १.८ मी)
+ {{convert|3|+|6|ft}} ३ + ६ फूट (०.९१ + १.८ मी)
, {{convert|3|,|6|ft}} ३, ६ फूट (०.९१, १.८ मी)
, and {{convert|3|, and|6|ft}} ३, and ६ फूट (०.९१, and १.८ मी)
, or {{convert|3|, or|6|ft}} ३, or ६ फूट (०.९१, or १.८ मी)
by {{convert|3|by|6|ft}} ३ by ६ फूट (०.९१ by १.८ मी)
by(x) {{convert|3|by(x)|6|ft}} रुपांतरण त्रूटी: "by(x)" एकक अनोळखी आहे by on left; multiply (×) on right
by(x)|order=flip {{convert|3|by(x)|6|ft|order=flip}} रुपांतरण त्रूटी: "by(x)" एकक अनोळखी आहे
x {{convert|3|x|6|ft}} ३ by ६ फूट (०.९१ मी × १.८ मी) Scientific notation.
|abbr=on alters the punctuation
x|abbr=on {{convert|3|x|6|ft|abbr=on}} ३ फूट × ६ फूट (०.९१ मी × १.८ मी)
xx |xx| is deprecated. Use |x| instead
* |*| is deprecated. Use |x| instead
to- |to-| is deprecated. Use |to(-)| instead
& |&| is deprecated. Use |and| instead
abbr=mos |abbr=mos is deprecated. Use |x| or |by| instead

Ranges can use more than two values.

Convert Output
{{convert|3|x|4|x|24|in}} ३ by ४ by २४ इंच (७६ × १०० × ६१० मिमी)
{{convert|3|x|4|to|6+1/2|x|8+3/4|in}} ३ by ४ to by इंच (७६ × १०० to १७० × २२० मिमी)

Ranges can be specified in the first parameter.

Convert Output
{{convert|3.2-7.5|ha}} रुपांतरण त्रूटी: मूल्य "3.2-7.5" अंकातच आवश्यक आहे
{{convert|3x4x24|in}} रुपांतरण त्रूटी: मूल्य "3x4x24" अंकातच आवश्यक आहे

अधिकचे शब्द[संपादन]

Some options provide text that is included in the output, as shown in the following examples.

Convert Output Description
{{convert|4|ft||adj=mid|-long}} ४-फूट-long (१.२ मी) Adjectival with mid-text between input and output (sets |adj=on)
{{convert|40|acre||adj=pre|planted}} ४० planted एकर (१६ ha) Text before the input unit
{{convert|4|m||disp=preunit|+ }} ४+ मीटर (१३+ फूट) Same text before the input and output units
{{convert|4|m||disp=preunit|+ |or more }} ४+ मीटर (१३ or more फूट) Different text before the input and output units
{{convert|20|impfloz||disp=x|, approximately }} २० imperial fluid ounce, approximately ५७० मिली; १९ US fl oz Text before the output (replaces the join)
{{convert|100|m||disp=x|/day (|/day)}} १०० मीटर/day (३३० फूट/day) Text before and after the output (replaces the join)

In each of the above examples, "||" provides an empty output unit which causes the default output to be used. An output unit, possibly empty, must be specified to avoid the template interpreting the extra text as the output unit. For example, using {{convert|4|ft|adj=mid|-long}} has the same effect as using {{convert|4|ft|-long|adj=mid}}, namely that an error would occur because "-long" would be used as the output unit. The following illustrates the error (hover the mouse over the error text to see that the problem is due to "-long" ) and how it may be avoided.

  • {{convert|4|ft|adj=mid|-long}}रुपांतरण त्रूटी: "-long" एकक अनोळखी आहे
  • {{convert|4|ft||adj=mid|-long}} → ४-फूट-long (१.२ मी)
  • {{convert|4|ft| |adj=mid|-long}} → ४-फूट-long (१.२ मी)
  • {{convert|4|ft|m|adj=mid|-long}} → ४-फूट-long (१.२ मी)

Displaying parts of a conversion[संपादन]

The following examples show how to display only a part of the output.

Convert Output Description
{{convert|2|cuyd|m3}} २ cubic yard (१.५ मी) normal convert
{{convert|2|cuyd|m3|abbr=values}} २ (१.५) input and output values
{{convert|2|cuyd|m3|disp=unit}} cubic yard input unit
{{convert|2|cuyd|m3|disp=unit|adj=on}} cubic-yard input unit, adjectival (hyphenated)
{{convert|2|cuyd|cuyd|0|disp=out|abbr=off}} २ cubic yard input (workaround)
{{convert|2|cuyd|m3|disp=unit2}} मी output unit (symbol)
{{convert|2|cuyd|m3|disp=unit2|abbr=off}} घन मीटर output unit (name)
{{convert|2|cuyd|m3|disp=number}} १.५ output value
{{convert|2|cuyd|m3|disp=out}} १.५ मी output value and unit
{{convert|2|cuyd|m3|abbr=off|disp=out}} १.५ घन मीटर output value and unit

Flipping the order of output[संपादन]

To invert the order of measurements, simply use |order=flip

  • {{convert|10|km|mi}} → १० किलोमीटर (६.२ मैल) (default)
  • {{convert|10|km|mi|order=flip}} → ६.२ मैल (१० किमी)

Wrapping and line breaking[संपादन]

Convert uses the regular space (" ") and non-breaking space (&nbsp; which shows: " ") to control line-breaking (also called wrapping/nowrapping).

In all examples below, an &nbsp; is shown as "_" (red underscore): "3_ft".

Wrapping is possible where a regular space (" ") is used. Prevent wrapping is enforced in the template using the non-breaking space, that ties and keeps text elements together.

3 feet may break after "3"
3&nbsp;ft, or साचा:Replace, will not break after "3"
A line break (<br/>) forces a newline (line break), and so overrules any nowrap setting at that point.

Word meaning:

In measurements, SI uses wording that says that value = number × unit, for example length = number × meter.
In {{Convert}} documentation, sometimes 'value' is uses to mean the number; and abbr is used to mean unit symbol(s).
Within a single measured value (number and unit)

The separator between the number and the unit can be a space or a nonbreaking space (&nbsp;):

  • When a unit is abbreviated (symbol is shown), the separator is &nbsp;.
{{convert|12|m|ft|abbr=on}}साचा:Replace
  • When a unit is not abbreviated (name is shown), the separator is a space.
{{convert|12|m|ft}}साचा:Replace
This can be set (overruled) to be &nbsp; by |adj=j (for 'join').
{{convert|12|m|ft|adj=j}}साचा:Replace
  • Some units do not have a symbol and always use a space (such as acre).
{{convert|3|acre|m2|abbr=on}}साचा:Replace
  • Except, option |adj=j ("join") forces the number-unit separator (space) to be &nbsp;.
{{convert|3|acre|m2|adj=j}}साचा:Replace
  • Except, &nbsp; is always used when a measurement is in multiple units.
{{convert|1|ft|6|in|cm}}साचा:Replace
{{convert|2|m|ftin}}साचा:Replace
  • Except, if option |adj=on is used and the unit is not abbreviated, the separator is a hyphen ("-").
{{convert|2|m|ftin|adj=on}}साचा:Replace
  • When the name of a number is used, &nbsp; is used as the separator between the number and the name. For example, a measurement spelled as "12 million metres" has &nbsp; before "million" and a space afterwards.
{{convert|12|e6m}}साचा:Replace
Between measurements
  • A space is used as the separator in a join between the first and second measurement.
{{convert|3|ft|m}}साचा:Replace
  • Except for the special case before "[" :
{{convert|12|in|cm|disp=sqbr|abbr=on}}साचा:Replace (&nbsp; before "[")
  • Multiple output measurements (by listing units) always use a space between measurements ("; " has a space after ";").
{{convert|2|acre|m2 sqft ha}}साचा:Replace
Between components of a measurement (e.g., in a range; between foot–inch)
  • A measurement in multiple units always uses a space between components ("1 foot 6 inches" has &nbsp; before the unit names, but a space after "foot").
{{convert|1|ft|6|in|cm}}साचा:Replace
  • In a range, spaces are generally used to separate items. For example, "to" and "or" have a space before and after in the following.
{{convert|12|to|20|in|cm}}साचा:Replace
{{convert|12|or|20|in|cm}}साचा:Replace
  • The ranges +/- and , always use &nbsp;:
{{convert|12|+/-|2|in|cm}}साचा:Replace
{{convert|12|,|20|in|cm}}साचा:Replace
  • The "to-" range (same as "to(-)") is an exception. When a unit is not abbreviated, "to" has &nbsp; before and a space after.
{{convert|12|to-|20|in|cm}}साचा:Replace
  • The "x" range is an exception. When a unit is abbreviated, "×" has a space before and &nbsp; after.
{{convert|12|x|20|in|cm}}साचा:Replace
Overrule by setting a line break
  • Parameter |disp=br adds a forced line break (<br/>) between measurements; brackets are omitted.
{{convert|12|m|ft|disp=br}}12 metres<br/>39 feet shows:
साचा:Replace
Preview wikicode

To see the wikicode result of the convert template: put your {{convert|...}} code into Special:ExpandTemplates and then preview by clicking OK.

सारण्या[संपादन]

The following parameters are intended for use in tables.

Parameter Description
|disp=table for a table cell with align="right"
|disp=tablecen for a table cell with align="center"
|sortable=on output a numeric hidden sort field for a sortable table

The following shows the wikitext output by some example converts.

Convert Resulting wikitext
{{convert|47.5|kg|lb}} 47.5 kilograms (105 lb)
{{convert|47.5|kg|lb|disp=table}} align="right"|47.5
|align="right"|105
{{convert|47.5|kg|lb|disp=tablecen}} align="center"|47.5
|align="center"|105
{{convert|47.5|kg|lb|sortable=on}} <span style="display:none">7001475000000000000</span>47.5 kilograms (105 lb)

Fixed table[संपादन]

This wikitext:

{|class="wikitable"
! align=right, rowspan="2" |
!colspan="2"| Length
!colspan="2"| Weight
|- style="vertical-align:bottom;"
!metres !!ft in !!kg !!lb
|-
! Lorem ipsum
| {{convert|28.1|m|ftin|disp=table}}
| {{convert|47.5|kg|lb|disp=table}}
|-
! Dolor sit amet
| {{convert|9.9|m|ftin|disp=table}}
| {{convert|74.1|kg|lb|disp=table}}
|-
! Consectetur
| {{convert|38.2|m|ftin|disp=table}}
| {{convert|31.5|kg|lb|disp=table}}
|-
! Adipisicing elit
| {{convert|18.7|m|ftin|disp=table}}
| {{convert|52.7|kg|lb|disp=table}}
|}

produces this table:

Length Weight
metres ft in kg lb
Lorem ipsum २८.१ ९२ फूट २ इंच ४७.५ १०५
Dolor sit amet ९.९ ३२ फूट ६ इंच ७४.१ १६३
Consectetur ३८.२ १२५ फूट ४ इंच ३१.५ ६९
Adipisicing elit १८.७ ६१ फूट ४ इंच ५२.७ ११६

सॉर्टेबल टेबल[संपादन]

This wikitext:

{|class="wikitable sortable"
! align=right, rowspan="2" |
!colspan="2"| Length
!colspan="2"| Weight
|- style="vertical-align:bottom;"
!metres !!ft in !!kg !!lb
|-
! Lorem ipsum
| {{convert|28.1|m|ftin|disp=table|sortable=on}}
| {{convert|47.5|kg|lb|disp=table|sortable=on}}
|-
! Dolor sit amet
| {{convert|9.9|m|ftin|disp=table|sortable=on}}
| {{convert|74.1|kg|lb|disp=table|sortable=on}}
|-
! Consectetur
| {{convert|38.2|m|ftin|disp=table|sortable=on}}
| {{convert|31.5|kg|lb|disp=table|sortable=on}}
|-
! Adipisicing elit
| {{convert|18.7|m|ftin|disp=table|sortable=on}}
| {{convert|52.7|kg|lb|disp=table|sortable=on}}
|}

produces this table:

Length Weight
metres ft in kg lb
Lorem ipsum 7001281000000000000२८.१ ९२ फूट २ इंच 7001475000000000000४७.५ १०५
Dolor sit amet 7000990000000000000९.९ ३२ फूट ६ इंच 7001741000000000000७४.१ १६३
Consectetur 7001382000000000000३८.२ १२५ फूट ४ इंच 7001315000000000000३१.५ ६९
Adipisicing elit 7001187000000000000१८.७ ६१ फूट ४ इंच 7001527000000000000५२.७ ११६

एकके एकवचनात किंवा बहुवचनात/Units in singular or plural[संपादन]

Unit symbols are always singular. Unit names can be singular or plural. A unit is singular when the number is exactly +1:

  • {{convert|0.5|ft|m|abbr=off}} → ०.५ फूट (०.१५ मीटर)
  • {{convert|1|ft|m|abbr=off}} → १ फूट (०.३० मीटर)
  • {{convert|2|ft|m|abbr=off}} → २ फूट (०.६१ मीटर)
Note: as of November 2014, in certain conditions this topic can behave unexpected (bug).

Setting |adj=1 makes these values singular: (−1 <= v and v < 0) or (0 < v and v <= 1)

  • {{convert|2|ft|m|adj=1|abbr=off}} → २ फूट (०.६१ मीटर)
  • {{convert|1|ft|m|adj=1|abbr=off}} → १ फूट (०.३० मीटर)
  • {{convert|0.5|ft|m|adj=1|abbr=off}} → ०.५ फूट (०.१५ मीटर)
  • {{convert|0|ft|m|adj=1|abbr=off}} → ० फूट (० मीटर)
  • {{convert|-0.5|ft|m|adj=1|abbr=off}} → −०.५ फूट (−०.१५ मीटर)
  • {{convert|-1|ft|m|adj=1|abbr=off}} → −१ फूट (−०.३० मीटर)
  • {{convert|-2|ft|m|adj=1|abbr=off}} → −२ फूट (−०.६१ मीटर)

प्राचलांची यादी/Parameter list[संपादन]

Parameter options for {{convert}}
प्राचल किंमत वर्णन नोंदी
|abbr=in in Use symbol for first (left-hand side) unit Symbol ('abbreviation')
|abbr=off off Use name for all units Symbol ('abbreviation')
|abbr=none none
|abbr=on on Use symbol for all units Symbol ('abbreviation')
|abbr=out out Use symbol for right-hand side unit (default) Symbol ('abbreviation')
|abbr=values values Show only input and output numbers, not units Parts only
|abbr=~ ~ Shows both unit name and symbol Symbol & name
|adj=j j Join number and unit name using "&nbsp;" instead of a space Join values
|adj=mid|… mid User-specified text after the input unit; sets adj=on (adjective). Expects 1 unnamed parameter. Word adding, adjective
|adj=on on Unit name is adjective (singular and hyphenated) Grammar, adjective
|adj=pre|… pre User-specified text before input unit. Expects 1 unnamed parameter. Word adding
|adj=ri0 ri0 Round input with precision 0 Rounding and significant figures
|adj=ri1 ri1 Round input with precision 1 Rounding and significant figures
|adj=ri2 ri2 Round input with precision 2 Rounding and significant figures
|adj=ri3 ri3 Round input with precision 3 Rounding and significant figures
|disp=b b Join input and output using " (...)" (default) Join values
|disp=sqbr sqbr Join input and output using " [...]" Join values
|disp=br br Join input and output using "<br/>" Join values
|disp=comma comma Join input and output using ", " Join values
|disp=or or Join input and output using " or " Join values
|disp=number number Display output number only Parts only
|disp=output number only output number only
|disp=out out Display only output number and name/symbol Parts only
|disp=output only output only
|disp=preunit|…[|…] preunit Text to be inserted after value and before units, for both input and output, with optionally different text for output. Expects 1 or 2 unnamed parameters. Word adding
|disp=table table Output is suitable for a table cell with align="right" Table columns
|disp=tablecen tablecen Output is suitable for a table cell with align="center" Table columns
|disp=unit unit Display input name/symbol only (not input number, not output) Parts only
|disp=unit2 unit2 Display output name/symbol only (not input; not output number) Parts only
|disp=x|... x Join input and output using user-specified text Word adding
|comma=5 05 Only use comma for thousands separator if 5 or more digits Number format
|comma=gaps gaps Use gaps (space), not comma, for thousands separator Number format
|comma=gaps5 gaps5 Use gaps (space), but only if 5 or more digits Number format
|comma=off off No thousands separator Number format
|frac=N N Show imperial number in fractions, denominator=N Number format, fraction
|lk=in in Link left-hand side unit name or symbol Unit link
|lk=on on Link all unit names or symbols (but not twice for the same unit) Unit link
|lk=out out Link right-hand side unit name or symbol Unit link
|order=flip flip Inverts order of input, output measurements (conversion first) Order
|round=5 05 Rounds calculation to the nearest multiple of 5 Rounding and significant figures
|round=25 25 Rounds calculation to the nearest multiple of 25 Rounding and significant figures
|round=each each In a range, each number is rounded by the default rounding Rounding and significant figures
|sigfig=N N Round output number to N significant figures (N is a positive integer) Rounding and significant figures
|sortable=in in Output numeric hidden sort field for use in a sortable table (based on input) Table sort
|sortable=on on
|sortable=out out Output numeric hidden sort field for use in a sortable table (based on output) Table sort
|sp=us us Use U.S. spelling (like "meter" instead of default "metre") Spelling U.S. names
|spell=in in Spell input number in words Spelling numbers
|spell=In In Spell input number in words with first letter uppercase Spelling numbers
|spell=on on Spell input and output numbers in words Spelling numbers
|spell=On On Spell input and output numbers in words with first letter uppercase Spelling numbers
|$= $ Replace $-sign with a currency sign, for example in $/acre (no currency conversion happens) Cost per unit
|debug=yes yes Debugging only. In a sortable table: show the normally hidden sort key Table sort
|abbr=comma comma Deprecated. Use |comma=off Number format
|abbr=mos mos Deprecated. Use |x| or |by| Range format
|adj=1 01 Deprecated. Do not use. No need to deviate from MOS regarding plurals Plural or singular
|adj=flip flip Deprecated. Use |order=flip Order
|adj=nocomma nocomma Deprecated. Use |comma=off Number format
|disp=2 02 Deprecated. Use |disp=output only Parts only
|disp=5 05 Deprecated. Use |round=5 Rounding and significant figures
|disp=flip flip Deprecated. Use |order=flip Order
|disp=flip5 flip5 Deprecated. Use |order=flip |round=5 Order, rounding
|disp=nocomma nocomma Deprecated. Use |comma=off Number format
|disp=u2 u2 Deprecated. Use |disp=unit2 Parts only
|near=5 05 Deprecated. Use |round=5 Rounding and significant figures

Complicated grammar[संपादन]

This example is from article Fort McHenry:

The American defenders had 18-, 24- and 32-pounder (8, 11 and 15 kg) cannons.

This result cannot reasonably be produced by {{convert}}. However, convert can be used to construct the required text.

  • Use {{convert}} with subst to insert the required wikitext into the article or your sandbox.
    had {{subst:convert|18|,|24|,|32|lb|kg|0}} cannons
    → had १८, २४, ३२ पौंड (८, ११, १५ किलो) cannons
  • When the edit is saved, the convert template is replaced with the result.
  • Edit the result to produce the final text.
    → had 18-, 24- and 32-pounder (8, 11 and 15 kg) cannons

An alternative to subst would be to enter {{convert|18|,|24|,|32|lb|kg|0}} into Special:ExpandTemplates, then copy and edit its result into the article.

Deprecated[संपादन]

साचा:Convert/doc/deprecations list

मर्यादा/Limitations[संपादन]

This is a list of features that the module may be expected to support, but which will not work.

Composite units cannot be used in a range:

If an expression is wanted, it has to use {{#expr:...}}:

  • {{convert|3*12|ft|mm}}रुपांतरण त्रूटी: मूल्य "3*12" अंकातच आवश्यक आहे
  • {{convert|{{#expr:3*12}}|ft|mm}} → ३६ फूट (११,००० मिमी)
Translation arrow-indic.svg
ह्या लेखाचा/विभागाचा इंग्रजी किंवा अमराठी भाषेतून मराठी भाषेत भाषांतर करावयाचे बाकी आहे. अनुवाद करण्यास आपलाही सहयोग हवा आहे. ऑनलाईन शब्दकोश आणि इतर सहाय्या करिता भाषांतर प्रकल्पास भेट द्या.