साचा:Convert
या साच्याची नक्कल करुन,त्यात आवश्यक ते बदल करुन ती इतर विकिंवर वापरण्यासाठी ही माहिती बघा. |
येथे लुआच्या या विभागांचा वापर होतो: |
Template {{convert}} calculates measurements from one unit (you can enter) to another one, and then presents the results. For example:
{{convert|2|km|mi}}
→ २ किलोमीटर (१.२ मैल){{convert|7|mi|km}}
→ ७ मैल (११ किमी)
The available units are listed below. Units are case-sensitive always (kW, not KW and not kw). Multiple formatting and calculation options are listed below.
Unit name or symbol (abbreviation): 1 pound or 1 lb?
By default, the first value shows unit name spelled out, the second the symbol (or abbreviation). Use |abbr=on/off
to change this behaviour:
{{convert|1|lb|kg}}
→ १ पौंड (०.४५ किलो)
To abbreviate both:
{{convert|1|lb|kg|abbr=on}}
→ १ पौंड (०.४५ किलो){{convert|1|lb|kg|abbr=off}}
→ १ पौंड (०.४५ किलोग्रॅम)
|abbr=in
is the reverse behaviour to the default, |abbr=out
:
{{convert|1|lb|kg|abbr=in}}
→ १ पौंड (०.४५ किलोग्रॅम)
Convenience: {{cvt}} has |abbr=on
by default
Template {{cvt}} is similar to {{convert}}, but has |abbr=on
as the default behaviour. In {{cvt}}, all other options are available. So:
{{cvt|1|lb|kg}}
→ साचा:Cvt
is equal to:
{{convert|1|lb|kg|abbr=on}}
→ साचा:Cvt
Adjective: a 10-mile distance
Use |adj=on
to produce the adjective form:
A {{convert|10|mi|km|adj=on}} distance
→ A १०-मैल (१६ किमी) distance.
Default behaviour, for comparison:
{{convert|10|mi|km}} to go
→ १० मैल (१६ किमी) to go.
This option does not work with |abbr=on
.
Rounding: 100 ft is 30 m or 30.5 m or 30.48 m?
By definition, 100 ft equals ३०.४८ मी. In practical use, it is common to round the calculated metric number. With that, there are several possibilities.
Default rounding
By {{Convert}} default, the conversion result will be rounded either to precision comparable to that of the input value (the number of digits after the decimal point—or the negative of the number of non-significant zeroes before the point—is increased by one if the conversion is a multiplication by a number between 0.02 and 0.2, remains the same if the factor is between 0.2 and 2, is decreased by 1 if it is between 2 and 20, and so on) or to two significant figures, whichever is more precise. An exception to this is rounding temperatures (see below).
Examples of rounding | ||
---|---|---|
Input | Displays as | Note |
{{convert|123|ft|m|-1}} |
१२३ फूट (४० मी) | |
{{convert|123|ft|m|0}} |
१२३ फूट (३७ मी) | |
{{convert|123|ft|m|1}} |
१२३ फूट (३७.५ मी) | |
{{convert|550|ft|m|0}} |
५५० फूट (१६८ मी) | Approximate value is 167.64 m |
{{convert|550|ft|m}} |
५५० फूट (१७० मी) | Rounds to 170, when approximate value is 167.64 m |
{{convert|500|ft|m|0}} |
५०० फूट (१५२ मी) | Approximate value is 152.4 m |
{{convert|500|ft|m}} |
५०० फूट (१५० मी) | Rounds to 150, when approximate value is 152.4 m |
Convert supports four types of rounding:
Round to a given precision: use a precision number
Specify the desired precision with the fourth unnamed parameter (or third unnamed parameter if the "convert to" parameter is omitted; or fifth unnamed parameter if a range is specified; or fourth unnamed parameter again if a range is specified and the "convert to" parameter is omitted; needs to be replaced with a "precision" named parameter). The conversion is rounded off to the nearest multiple of 1⁄10 to the power of this number. For instance, if the result is 8621 and the round number is "-2", the result will be 8600. If the result is "234.0283043" and the round number is "0", the result will be 234.
Round to a given number of significant figures: |sigfig=
To specify the output number to be with n significant figures use |sigfig=<number>
:
{{convert|1200|ft|m|sigfig=4}}
→ १,२०० फूट (३६५.८ मी){{convert|1200|ft|m|sigfig=3}}
→ १,२०० फूट (३६६ मी){{convert|1200|ft|m|sigfig=2}}
→ १,२०० फूट (३७० मी){{convert|1200|ft|m|sigfig=1}}
→ १,२०० फूट (४०० मी)
Default behaviour, for comparison:
{{convert|1200|ft|m}}
→ १,२०० फूट (३७० मी)
Setting |sigfig=
is meaningless
{{convert|1200|ft|m|sigfig=0}}
→ रुपांतरण त्रूटी: Parameter sigfig "0" must be a positive integer
Round to a multiple of 5: 15, 20, 25, ...
Using |round=5
rounds the outcome to a multiple of 5.
{{convert|10|m|ft}}
→ १० मीटर (३३ फूट){{convert|10|m|ft|round=5}}
→ १० मीटर (३३ फूट)
Similar: using |round=25
rounds the outcome to a multiple of 25.
{{convert|10|m|ft}}
→ १० मीटर (३३ फूट){{convert|10|m|ft|round=25}}
→ १० मीटर (३३ फूट)
Default behaviour, for comparison:
{{convert|10|m|ft|sigfig=4}}
→ १० मीटर (३२.८१ फूट)
In a range, one can round each value individually to the default. Use |round=each
:
{{convert|10 x 200 x 3000|m|ft}}
→ रुपांतरण त्रूटी: मूल्य "10 x 200 x 3000" अंकातच आवश्यक आहे{{convert|10 x 200 x 3000|m|ft|round=each}}
→ रुपांतरण त्रूटी: मूल्य "10 x 200 x 3000" अंकातच आवश्यक आहे
Round to a multiple of a given fraction: 23⁄16 inch
Specify the desired denominator using |frac=<some positive integer>
. (Denominator is the below-the-slash number, for example the 3 in 1⁄3).
{{convert|5.56|cm|in|frac=16}}
→ ५.५६ सेंटीमीटर (२.१९ इंच){{convert|8|cm|in|frac=4}}
→ ८ सेंटीमीटर (३.१ इंच)
The fraction is reduced when possible:
{{convert|8|cm|in|frac=100}}
→ ८ सेंटीमीटर (३.१ इंच)
Default behaviour, for comparison:
{{convert|8|cm|in}}
→ ८ सेंटीमीटर (३.१५० इंच)
In temperatures: rounding °C, °F and K
In temperatures, the conversion will be rounded either to precision comparable to that of the input value or to that which would give three significant figures when expressed in kelvins, whichever is more precise.
{{convert|10,000|C|F K}}
→ १०,००० °से (१८,००० °फॅ; १०,३०० के){{convert|10,000.1|C|F K}}
→ १०,०००.१ °से (१८,०३२.२ °फॅ; १०,२७३.२ के){{convert|-272|C|F K}}
→ −२७२ °से (−४५७.६० °फॅ; १.१५ के){{convert|-272|C}}
→ −२७२ °से (−४५७.६० °फॅ){{convert|-300|C|F K}}
→ −३०० °से (−५०८.० °फॅ; −२६.९ के){{convert|0|C|F K}}
→ ० °से (३२ °फॅ; २७३ के)
The precision of the input number in example (1) is one digit, but the precision of its Kelvins expression is three, so the precision of the Fahrenheit conversion is made three (made 180...) . (1) and (2) seem to belie the fact that a ०.१ degrees Celsius change is a ०.१८ degrees Fahrenheit change, and make the 32 degrees difference shown in (1) begin to seem off somehow.
Result (1) seems off until you set the significant figures yourself with |sigfig=
:
{{convert|10000|C|sigfig=5}}
→ १०,००० °से (१८,०३२ °फॅ)
or you set the precision positionally, relative to the decimal point (zero being at the decimal point):
{{convert|10000|C|0}}
→ १०,००० °से (१८,०३२ °फॅ)
The precision of the input number in example (2) is six, so the precision of the Fahrenheit output is, whereas before, Kelvins had determined it to be three. Examples (3) and (4) show how this can be hidden and generate questions, but it occurs there because the Kelvins conversion generated two fractional parts. (Before it was the input number that generated the fractional part.) In example (3) the three input digits converted into into five significant output digits because of the two numbers after the decimal point, generated by the Kelvins conversion. This happened again in (5), but in (6) decimal fractions were neither given as input nor induced by the Kelvins conversion.
Into multiple units: १० °से (५० °फॅ; २८३ के)
Separate the multiple output units by a space:
{{convert|10|C|F K}}
→ १० °से (५० °फॅ; २८३ के){{convert|5|km|mi nmi}}
→ ५ किलोमीटर (३.१ मैल; २.७ nmi)
If the output unit names contain spaces, use +
as the separator.
See also:
- For multiple-unit options like 1 ft 5 in, see #In input and #In output.
Ranges of values
A range converts two values and separates them by your choice of words and punctuation.
A range: 6 to 17 kg (13 to 37 lb)
Range indicators are entered as the second parameter (between the values). Range separators can be:
साचा:Convert/doc/range separator list
Multiple dimensions: ६ मी × १२ मी (२० फूट × ३९ फूट)
Use by
:
{{convert|6|by|12|ft|m}}
→ ६ by १२ फूट (१.८ by ३.७ मी)
Use ×
, multiplication sign, or x
, letter:
{{convert|6|x|12|m|ft}}
→ ६ by १२ मीटर (२० फूट × ३९ फूट)
In science, the formal way is to set |x|
and |abbr=on
(keeping dimensions right, like in area = x km2):
{{convert|6|x|12|m|ft|abbr=on}}
→ ६ मी × १२ मी (२० फूट × ३९ फूट)
About feet, inch in ranges and multiples
While it is possible to enter feet, inch in a simple conversion, this is not possible for ranges:
{{convert|1|ft|3|in|x|3|ft|5|in|mm}}
→ रुपांतरण त्रूटी: "x" एकक अनोळखी आहे
Default behaviour, for comparison:
{{convert|1|ft|3|in|mm}}
→ १ फूट ३ इंच (३८० मिमी)
Words
Spelling of unit name: UK metre or US meter?
Default spelling of units is en-UK. To show en-US spelling, use |sp=us
:
{{convert|1|m|ft}}
→ १ मीटर (३.३ फूट)—default{{convert|1|m|ft|sp=us}}
→ १ मीटर (३.३ फूट)
Spell out numbers: ten miles
To write a number in words, use |spell=in
:
{{convert|10|mi|m|spell=in}}
→ १० मैल (१६,००० मी)
To spell out both in and out values, use |spell=on
:
{{convert|10|mi|m|spell=on}}
→ १० मैल (१६,००० मी)
To make first letter a capital, use |spell=In
, |spell=On
{{convert|10|mi|m|spell=In}}
→ १० मैल (१६,००० मी){{convert|10|mi|m|spell=On}}
→ १० मैल (१६,००० मी)
Remember that the spelling of the units (ft, m) is independently set by |abbr=
. To the extreme:
{{convert|10|mi|m|spell=on|abbr=off|sp=us}}
→ १० मैल (१६,००० मीटर)
Inserted before units: 4 planted acres
{{convert|4|acre||adj=pre|planted}}
→ ४ planted एकर (१.६ ha)
disp=preunit
is similar, but has no separator after the specified text, and can have different text for the output value:
{{convert|4|acre||disp=preunit|planted }}
→ ४ planted एकर (१.६ planted ha){{convert|4|acre||disp=preunit|planted |reforested-}}
→ ४ planted एकर (१.६ reforested-ha)
After adjective unit: A १०-फूट-long corridor
{{convert|10|ft|m|adj=mid|-long}}
→ १०-फूट-long (३.० मी)
Plurals: 1 inch, 2 inches
The unit symbol is singular always. Depending on the preceding number only, a unit name can be shown plural.
{{convert|1|metre}}
→ रुपांतरण त्रूटी: Usem
(notmetre
){{convert|2|metre}}
→ रुपांतरण त्रूटी: Usem
(notmetre
){{convert|2|metre|abbr=on}}
→ रुपांतरण त्रूटी: Usem
(notmetre
)
- Exception
Entering the unit spelled |foot|
forces singular output "foot", whatever the number is.
{{convert|100|foot|abbr=off}}
→ १०० फूट (३० मीटर)
Numbers
Using an SI prefix: gigameter (Gm), or micrometer (μm)
साचा:Sidebar metric prefixes (small)
Units can have an SI prefix like G
before the unit: Gm
, and giga
before the name: gigameter
. These are plain multiplication factors.
To illustrate, these are trivial calculations (from meter to meter), showing the multiplication factor:
- १२ गिमी (१.२×१०१० मी)
- १२ μमी (१.२×१०−५ मी)
The prefix can be added before the SI unit (here: unit m
for meter):
{{convert|12|Gm|mi|abbr=on}}
→ १२ गिमी (७५,००,००० मैल)Mm
: १२ मेमी (७,५०० मैल)km
: १२ किमी (३९,००० फूट)mm
: १२ मिमी (०.४७ इंच)μm
: १२ μमी (०.०१२ मिमी)um
: १२ uमी (०.०१२ मिमी) (letter "u" can be used for "μ" here)
The prefix can be used in the output unit:
{{convert|12000|mi|Mm|abbr=on}}
→ १२,००० मैल (१९ मेमी){{convert|12|in|μm|abbr=on}}
→ १२ इंच (३,००,००० μमी)
As an exception, the non-SI unit "inch" can have the "μ" prefix too)
{{convert|12|μm|μin|abbr=on}}
→ १२ μमी (४७० µin)
Engineering notation: 7 × 106 m
In the unit: e6m
Engineering number notations like 7E6 (for 7 × 106) can be entered as a "prefix" to the unit:
{{convert|7|e6m}}
→ ७ दशलक्ष मीटर (२,३०,००,००० फूट)
The same is possible for the output unit:
{{convert|23,000,000|ft|e6m}}
→ २,३०,००,००० फूट (७.०×१० ६ मी)
Any standard unit (not a combination, multiple, or built-in unit) can have such a prefix:
e3
(thousand),e6
(million),e9
(billion),e12
(trillion),e15
(quadrillion).
Scientific notation: 1.23×10−14
In scientific notation, a number is written like १.२३×१०−१४. The plain number has exactly one digit before the decimal point.
With {{convert}}, the input can be in e-notation such as 12.3e4
. This value is displayed as a power of ten, and the output is displayed in scientific notation, except that an output value satisfying 0.01 <= v < 1000 is shown as a normal number. In addition, if the output value is 1000 and sigfig=4 is used, the value is displayed as a normal number.
{{convert|12.3e-15|atm|atm|abbr=on}}
→ १२.३e-१५ atm (१.२३×१०−१४ atm){{convert|0.00000005|atm|atm|abbr=on}}
→ ०.०००००००५ atm (५.०×१०−८ atm)
Input with fractions: १ १⁄२ इंच (३८.१ मिमी)
The number to convert can be written in fractions. Both /
(keyboard slash) and ⁄
(fraction slash) are accepted:
{{convert|1/2|in|mm|1}}
→ १⁄२ इंच (१२.७ मिमी)
{{convert|1⁄2|in|mm|1}}
→ रुपांतरण त्रूटी: मूल्य "1⁄2" अंकातच आवश्यक आहे
With integers, use a +
sign
{{convert|2+1⁄2|in|mm|1}} → रुपांतरण त्रूटी: मूल्य "2+1⁄2" अंकातच आवश्यक आहे
When negative, use a hyphen -
and repeat it:
{{convert|-2-1⁄2|in|mm|1}} → रुपांतरण त्रूटी: मूल्य "-2-1⁄2" अंकातच आवश्यक आहे
{{convert|2-1⁄2|in|mm|1}} → रुपांतरण त्रूटी: मूल्य "2-1⁄2" अंकातच आवश्यक आहे Note: this is read as a range
{{convert|-2+1⁄2|in|mm|1}} → रुपांतरण त्रूटी: मूल्य "-2+1⁄2" अंकातच आवश्यक आहे Should be a number, not an expression (do not require a calculation)
Output with horizontal fraction bar in: Page साचा:Sfrac/styles.css has no content.1/2 inch
Using a double slash (//
) returns a horizontal bar fraction:
{{convert|1//2|in|mm|1}}
→ १२ इंच (१२.७ मिमी)
{{convert|2+1//2|in|mm|1}}
→ २१२ इंच (६३.५ मिमी)
Thousands separator: 1,000 mi or 1000 mi
In input, a comma for thousands separator is accepted but not required; a gap (space) is not accepted. In output, by default, the thousand separator is the comma:
{{convert|1234567|m|ft}}
→ १२,३४,५६७ मीटर (४०,५०,४१७ फूट)
{{convert|1,234,567|m|ft}}
→ १२,३४,५६७ मीटर (४०,५०,४१७ फूट)
{{convert|1 234 567|m|ft}}
→ रुपांतरण त्रूटी: मूल्य "1 234 567" अंकातच आवश्यक आहे
Set |comma=off
to remove the separator from the output:
{{convert|1234567|m|ft|comma=off}}
→ १२,३४,५६७ मीटर (४०,५०,४१७ फूट)
Use |comma=gaps
to use digit grouping by gap (thin space) as a thousands separator:
{{convert|1234567|m|ft|comma=gaps}}
→ १२३४५६७ मीटर (४०५०४१७ फूट)
Default behaviour, for comparison:
{{convert|1234567|m|ft}}
→ १२,३४,५६७ मीटर (४०,५०,४१७ फूट)
Setting |comma=5
or |comma=gaps5
will only add the separator when the number of digits is 5 or more:
{{convert|1234|m|ft|comma=5}}
→ १२३४ मीटर (४०४९ फूट)
{{convert|1234567|m|ft|comma=5}}
→ १२,३४,५६७ मीटर (४०,५०,४१७ फूट)
{{convert|1234|m|ft|comma=gaps5}}
→ १२३४ मीटर (४०४९ फूट)
{{convert|1234567|m|ft|comma=gaps5}}
→ १२३४५६७ मीटर (४०५०४१७ फूट)
Default behaviour, for comparison:
{{convert|1234|m|ft}}
→ १,२३४ मीटर (४,०४९ फूट)
Output manipulation
Brackets and separators: 10 m [33 ft]
Punctuation that distinguishes the two measurements is set by |disp=
.
Options are: b
(the default), sqbr
, comma
, or
, br
, x|…
:
{{convert|10|m|ft|disp=sqbr}}
→ १० मीटर [३३ फूट]
{{convert|10|m|ft|disp=comma}}
→ १० मीटर, ३३ फूट
{{convert|10|m|ft|disp=or}}
→ १० मीटर or ३३ फूट
Default behaviour, for comparison:
{{convert|10|m|ft}}
→ १० मीटर (३३ फूट)
Setting |disp=br
will force a new line (<br/>
)
{{convert|10|m|ft|disp=br}}
→ १० मीटर
३३ फूट
Also |disp=br()
will force a new line, and keep the brackets:
{{convert|10|m|ft|disp=br()}}
→ १० मीटर (३३ फूट)
Setting |disp=x|…
allows any text as separator:
{{convert|10|m|ft|disp=x|_MyText_}}
→ १० मीटर_MyText_३३ फूट—(To display spaces, use
)
Flipping (reordering) the two measurements: १,६०९.३ मीटर (१ मैल)
Setting |order=flip
will flip (swap) the two measurements:
{{convert|1|mi|m|order=flip}}
→ १,६०९.३ मीटर (१ मैल)
Default behaviour, for comparison:
{{convert|1|mi|m}}
→ १ मैल (१,६०९.३ मीटर)
When converting to multiple units, the effect is:
{{convert|10|km|mi nmi|order=flip}}
→ ६.२१३७ मैल; ५.३९९६ nautical mile (१० किलोमीटर)
{{convert|10|km|nmi mi|order=flip}}
→ ५.३९९६ nautical mile; ६.२१३७ मैल (१० किलोमीटर)
Displaying parts of the result: २ (१.५)
It is possible to display only parts of the conversion result:
रुपांतर करा
बहीर्दाय(आउटपुट)
वर्णन
{{convert|2|cuyd|m3}}
२ cubic yard (१.५ मी३)
अविचल वर्तन, ताडण्यासाठी
{{convert|2|cuyd|m3|abbr=values}}
२ (१.५)
अंतर्दाय व बहीर्दाय आकडे
{{convert|2|cuyd|m3|disp=unit}}
cubic yard
अंतर्दाय एकक
{{convert|2|cuyd|m3|disp=unit|adj=on}}
cubic-yard
अंतर्दाय एकक, adjective (hyphenated)
{{convert|2|cuyd|cuyd|0|disp=out|abbr=off}}
२ cubic yard
अंतर्दाय (workaround)
{{convert|2|cuyd|m3|abbr=~}}
२ cubic yard (cu yd, १.५ मी३)
Input: both name and symbol
{{convert|2|cuyd|m3|disp=unit2}}
मी३
बहीर्दाय एकक (symbol)
{{convert|2|cuyd|m3|disp=unit2|abbr=off}}
घन मीटर
बहीर्दाय unit (name)
{{convert|2|cuyd|m3|disp=number}}
१.५
बहीर्दाय किंमत
{{convert|2|cuyd|m3|disp=out}}
१.५ मी३
बहीर्दाय किंमत व एकक
{{convert|2|cuyd|m3|disp=out|abbr=off}}
१.५ घन मीटर
बहीर्दाय किंमत व एकक
Display both input name and symbol: 2 kilopascals [kPa]
Setting |abbr=~
returns both name and symbol of the first (input) unit:
{{convert|2|kPa|psi|abbr=~}}
→ २ किलोpascal (किPa, ०.२९ psi)
A {{convert|2|kPa|psi|abbr=~|adj=on}} pressure
→ A २-किलोpascal (किPa, ०.२९ psi) pressure
Table options
For the wikitable structure, there are three options: add a line-break, split the result over columns and make the table sortable.
Enforced line break
|disp=br
adds a line-break and omits brackets.
|disp=br()
adds a line-break and does add brackets to the converted value. This may be useful in tables:
|disp=br
|disp=br()
१०० किलोमीटर
६२ मैल
१०० किलोमीटर (६२ मैल)
Table columns showing numbers only
Using {convert} in a table cell, with |disp=table
splits the result over two columns:
{{convert|10|m|ft|disp=table}}
→ align="right"|१०
|align="right"|३३
|disp=tablecen
does the same, and also centers the text:
{{convert|20|m|ft|disp=tablecen}}
→ align="center"|२०
|align="center"|६६
The units are added as a column header:
m
ft
|disp=table
१०
३३
|disp=tablecen
२०
६६
|disp=<other>
(default)
३० मीटर (९८ फूट)
Sorting
Use |sortable=on
to include a hidden numerical sortkey in the output, suitable for use in a table with sortable columns. Technically, this places a hidden string before the actual displayed values:
{{convert|10|m|ft|sortable=on}}
→ <span style="display:none">7001100000000000000</span>10 metres (33 ft)
Use both |disp=table
and |sortable=on
together to produce table columns (pipe symbols) for each value in sortable columns:
m
ft
A
१५ ३⁄४
५२
B
१५.५
५१
C
१६.०
५२.५
D
१६
५२
The generated sortkey is calculated in a consistent way based on both the value and its unit as passed to the convert template. In most cases convert uses the passed value converted to SI base units. It is therefore not necessarily the displayed value or other alternate units and is calculated regardless of output format options. Using different units or different order of units in individual rows should therefore not lead to incorrect sorting, although variations in rounding can give surprising results, since an unrounded number is used for the sortkey.
Units
All units
See also: Convert/list of units
{{Convert}}द्रारे सहाय्यीकृत एककांची छोटी यादी
स्पष्टीकरण
पद्धत
एकक
कोड (इंग्रजी)
(पर्यायी)
लघुरूप
नोंदी
रुपांतरण
एकत्रिकरण
कोणत्या पद्धतीतील हे एकक आहे
नावानुसार एककांची यादी
हा साचा वापरतांना टाकावयाचे कोड
साच्याद्वारे दाखविण्यात येणारे लघुरूप
एककांसाठीच्या सर्वसाधारण नोंदी ज्या एककास किंवा त्यांचा या साच्यातील वापरास लागु पडतील
रुपांतरण गुणक जे , मुळ एस आय एककांपासून किंवा एककात रुपांतरण करण्यास साच्याद्वारे वापरल्या जातात
अनेक रुपांतरणे करण्यास आवश्यक कोड
लांबी
(संपूर्ण यादी)
system
unit
unit-
code
abbrev-
iation
notes
sample default
conversion
combination
output units
SI
मेगामीटर
Mm
मेमी
US spelling: megameter
१.० मेमी (३२,८०,८३९ फूट ११ इंच)
किलोमीटर
km
किमी
US spelling: kilometer
१.० किमी (०.६२ मैल)
- km mi
मीटर
m
मी
US spelling: meter
१.० मी (३ फूट ३ इंच)
- m ft
- m ftin
सेंटीमीटर
cm
सेंमी
US spelling: centimeter
१.० सेंमी (०.३९ इंच)
- cm in
मिलीमीटर
mm
मिमी
US spelling: millimeter
१.० मिमी (०.०३९ इंच)
- mm in
मायक्रोमीटर
µm (um)
µमी
US spelling: micrometer
१.० µमी (३.९×१०−५ इंच)
नॅनोमीटर
nm
नॅमी
US spelling: nanometer
१.० नॅमी (३.९×१०−८ इंच)
non-SI metric
ångström
Å
(angstrom)
Å
१.० Å (३.९×१०−९ इंच)
Imperial
&
US customary
मैल
mi
(none)
१.० मैल (१.६ किमी)
- mi km
furlong
furlong
(none)
१.० furlong (६६० फूट; २०० मी)
chain
chain
(none)
१.० chain (६६ फूट; २० मी)
rod
rd
rd
For other names of this unit see the full list.
१.० rd (१७ फूट; ५.० मी)
fathom
fathom
(none)
fathom ≡ 6 ft
१.० fathom (६.० फूट; १.८ मी)
यार्ड
yd
(none)
assumes the international definition
१.० यार्ड (०.९१ मी)
फूट
ft (foot)
(none)
The foot code will produce foot as the plural form.
१.० फूट (०.३० मी)
- ftin (feet and inches)
- ft m (foot m)
इंच
in
(none)
१.० इंच (२५ मिमी)
- in cm
- in mm
Other
nautical mile
nmi
nmi
the international standard nautical mile
For other nautical miles see the full list.
१.० nmi (१.९ किमी; १.२ मैल)
parsec
pc
pc
१.० pc (३.३ ly)
light-year
ly
ly
१.० ly (६३,००० AU)
astronomical unit
AU
AU
१.० AU (१५,००,००,००० किमी; ९,३०,००,००० मैल)
क्षेत्रफळ
(संपूर्ण यादी)
पद्धत
एकक
कोड(इं.)
(पर्यायी)
लघुरूप
नोंदी
रुपांतरण- मी२
एकत्रिकरण
एस आय
चौरस किमी
km2
चौ. किमी
US spelling: square kilometer
१०,००,०००
- km2 sqmi
- m2 sqft
- cm2 sqin
- mm2 sqin
गैर-एसआय
मेट्रिक
शाही
व
युएस नेहमीची
चौरस मैल
sqmi
चौ. मैल
२५,८९,९८८.११०३३६
- sqmi km2
square yard
sqyd
sq yd
०.८३६१२७३६
- sqft m2 (sqfoot m2)
- sqin cm2
इतर
VOLUME
(Full list)
system
unit
unit-
code
abbrev-
iation
notes
conversion factor/m3
combinations
SI
साचा:Convert/m3
साचा:Convert/cm3
साचा:Convert/cc
साचा:Convert/mm3
non-SI metric
साचा:Convert/kl
साचा:Convert/kL
साचा:Convert/l
- l impgal
- l USgal
- l U.S.gal
- l USdrygal
- l U.S.drygal
- L impgal
- L USgal
- L U.S.gal
- L USdrygal
- L U.S.drygal
मिलीलीटर
ml
ml
इंग्लिश: milliliter
one cubic centimetre
०.०००००१
- ml impoz
- ml USoz
- ml U.S.oz
- mL impoz
- mL USoz
- mL U.S.oz
Imperial
&
US customary
Imperial
साचा:Convert/impbbl
साचा:Convert/impbsh
साचा:Convert/impbu
साचा:Convert/impgal
- impgal l
- impgal L
- impgal USgal
- impgal U.S.gal
- impgal USdrygal
- impgal U.S.drygal
साचा:Convert/impqt
साचा:Convert/imppt
साचा:Convert/impoz
- impoz USoz
- impoz U.S.oz
- impoz ml
- impoz mL
US customary
liquid measure
साचा:Convert/USbbl
साचा:Convert/U.S.bbl
साचा:Convert/oilbbl
साचा:Convert/USbeerbbl
साचा:Convert/U.S.beerbbl
साचा:Convert/USgal
- USgal l
- USgal L
- USgal impgal
- USgal l
- USgal L
- USgal impgal
साचा:Convert/USqt
साचा:Convert/U.S.qt
साचा:Convert/USpt
साचा:Convert/U.S.pt
साचा:Convert/USoz
- USoz ml
- USoz mL
- USoz impoz
- U.S.oz ml
- U.S.oz mL
- U.S.oz impoz
US customary
dry measure
साचा:Convert/USdrybbl
साचा:Convert/U.S.drybbl
साचा:Convert/USbsh
साचा:Convert/USbu
साचा:Convert/U.S.bsh
साचा:Convert/U.S.bu
साचा:Convert/USdrygal
- USdrygal l
- USdrygal L
- USdrygal impgal
- U.S.drygal l
- U.S.drygal L
- U.S.drygal impgal
साचा:Convert/USdryqt
साचा:Convert/U.S.dryqt
साचा:Convert/USdrypt
साचा:Convert/U.S.drypt
गती
(संपूर्ण यादी)
पद्धत
एकक
कोड (इंग्रजी)
(पर्याय)
लघुरूप
नोंदी
रुपांतरण अवयव/(मी/से)
एकत्रिकरण
एस आय
- m/s ft/s (m/s foot/s)
गैर-एस आय मेट्रिक
- km/h mph
शाही
&
युएस नेहमीची
- mph km/h
- ft/s m/s
समुद्री एकके
Force
(Full list)
system
unit
code
(alternative)
abbreviation
notes
conversion factor/N
combinations
SI
- GN LT-f
- GN LTf
- GN L/T-f
- GN L/Tf
- GN ST-f
- GN STf
- GN S/T-f
- GN S/Tf
- MN LT-f
- MN LTf
- MN L/T-f
- MN L/Tf
- MN ST-f
- MN STf
- MN S/T-f
- MN S/Tf
- kN LT-f
- kN LTf
- kN L/T-f
- kN L/Tf
- kN ST-f
- kN STf
- kN S/T-f
- kN S/Tf
- N lb-f
- N lbf
- N oz-f
- N ozf
- mN oz-f
- mN ozf
- mN gr-f
- mN grf
- μN gr-f
- μN grf
- nN gr-f
- nN grf
cgs
साचा:Convert/Mdyn
साचा:Convert/kdyn
साचा:Convert/dyn
साचा:Convert/mdyn
Metric gravitational units
साचा:Convert/t-f
साचा:Convert/tf
साचा:Convert/kg-f
साचा:Convert/kgf
साचा:Convert/g-f
साचा:Convert/gf
साचा:Convert/mg-f
साचा:Convert/mgf
Avoirdupois-based units
साचा:Convert/pdl
साचा:Convert/LT-f
- LT-f ST-f
- LTf STf
- L/T-f S/T-f
- L/Tf S/Tf
- ST-f LT-f
- STf LTf
- S/T-f L/T-f
- S/Tf L/Tf
साचा:Convert/lb-f
साचा:Convert/lbf
साचा:Convert/oz-f
साचा:Convert/ozf
साचा:Convert/gr-f
साचा:Convert/grf
Energy
(Full list)
system
unit
code
(alternative)
abbreviation
notes
conversion factor/J
combinations
SI
साचा:Convert/GJ
साचा:Convert/MJ
साचा:Convert/kJ
साचा:Convert/hJ
साचा:Convert/daJ
साचा:Convert/J
साचा:Convert/dJ
साचा:Convert/cJ
साचा:Convert/mJ
साचा:Convert/μJ
साचा:Convert/nJ
cgs
Watt-hour multiples
साचा:Convert/TWh
साचा:Convert/TW.h
साचा:Convert/GWh
साचा:Convert/GW.h
साचा:Convert/MWh
साचा:Convert/MW.h
साचा:Convert/kWh
साचा:Convert/kW.h
साचा:Convert/Wh
साचा:Convert/W.h
Electronvolt multiples
साचा:Convert/GeV
साचा:Convert/MeV
साचा:Convert/keV
साचा:Convert/eV
साचा:Convert/meV
Calorie multiples
साचा:Convert/Cal
साचा:Convert/Mcal
साचा:Convert/kcal
साचा:Convert/cal
साचा:Convert/mcal
pound/ounce-foot/
inch-hour-minute-second
साचा:Convert/ftpdl
साचा:Convert/ftlbf
साचा:Convert/ftlb-f
साचा:Convert/inlbf
साचा:Convert/inlb-f
साचा:Convert/inozf
साचा:Convert/inoz-f
साचा:Convert/hph
British thermal unit
TNT-based units
साचा:Convert/GtTNT
साचा:Convert/GtonTNT
साचा:Convert/MtTNT
साचा:Convert/MtonTNT
साचा:Convert/ktTNT
साचा:Convert/ktonTNT
साचा:Convert/tTNT
साचा:Convert/tonTNT
Other
साचा:Convert/Eh
साचा:Convert/Ry
साचा:Convert/toe
साचा:Convert/BOE
साचा:Convert/cuftnaturalgas
साचा:Convert/latm
साचा:Convert/Latm
साचा:Convert/impgalatm
साचा:Convert/USgalatm
साचा:Convert/U.S.galatm
तापमान
(वेगळे पान; संपूर्ण यादी)
पद्धत
एकक
कोड (इंग्रजीत)
(पर्यायी)
लघुरूप
नोंदी
रुपांतरण
केल्व्हिन मध्ये
एकत्रिकरण
एस आय
kelvin
के
के
Triple combinations are also possible. See the full list.
[के]
- K °C (K C)
- K °R (K R)
- K °F (K F)
degree Celsius
°C (C)
°C
([°C]+273.15)
- °C K (C K)
- °C °R (C R)
- °C °F (C F)
शाही
&
युएस नेहमीची
degree Rankine
°R (R)
°R
([°R]/1.8)
- °R K (R K)
- °R °C (R C)
- °R °F (R F)
degree Fahrenheit
°F (F)
°F
(([°F]+459.67)/1.8)
- °F K (F K)
- °F °C (F C)
- °F °R (F R)
Mass
(Full list)
system
unit
code
(alternative)
abbreviation
notes
conversion factor/kg
combinations
SI
किलोग्रॅम
kg
कि.ग्रॅ.
Triple combinations are also possible. See the full list.
१
- kg lb
- kg st
ग्रॅ
g
ग्रॅ
०.००१
- g oz
- mg gr
non-SI metric
- t LT
- t ST
- MT LT
- MT ST
Avoirdupois
- LT t
- LT MT
- LT ST
साचा:Convert/long ton
साचा:Convert/ST
- ST t
- ST MT
- ST LT
साचा:Convert/short ton
साचा:Convert/st
- st kg
- st lb
पाउंड
lb
पाउंड
Triple combinations are also possible. See the full list.
०.४५३५९२३७
- lb kg
- lb st
आउंस
oz
oz
०.०२८३४९५२३
- oz g
Troy
other
Pressure
unit
code
abbreviation
conversion factor/Pa
साचा:Convert/MPa
साचा:Convert/kPa
साचा:Convert/hPa
साचा:Convert/Pa
साचा:Convert/mPa
साचा:Convert/mbar
साचा:Convert/mb
साचा:Convert/dbar
साचा:Convert/bar
साचा:Convert/kBa
साचा:Convert/Ba
साचा:Convert/atm
साचा:Convert/Torr
साचा:Convert/mmHg
साचा:Convert/inHg
साचा:Convert/psi
Torque
unit
code
notes
newton metre
N·m (N.m)
Use N·m
or N.m
to get the mid-dot.
Nm
Torque conversions can go to and from the following units.
- foot-poundal
- foot-pound force
- inch-pound force
- inch-ounce force
Codes, abbreviations and conversion factors (but to N·m in this case) are the same as with the corresponding energy units as listed above.
Fuel efficiency
unit
code
(alternative)
notes
combinations
kilometres per litre
km/l (km/L)
Use km/L
to get "km/L"
- km/l mpgimp
- km/l mpgus
litres per 100 kilometres
l/100 km (L/100 km)
Use L/100 km
to get "L/100 km"
- l/100 km mpgimp
- l/100 km mpgus
litres per kilometre
l/km (L/km)
Use L/km
to get "L/km"
- l/km impgal/mi
- l/km usgal/mi
miles per imperial gallon
mpgimp
- mpgimp mpgus
miles per US gallon
mpgus (mpgUS, mpgU.S.)
Use mpgUS
to get "US"
Use mpgU.S.
to get "U.S."
mpgus
will give "U.S." if spelling is
set to US & "US" otherwise
- mpgus mpgimp
imperial gallons per mile
impgal/mi
- impgal/mi
US gallons per mile
usgal/mi (USgal/mi, U.S.gal/mi)
As above with the us
vs US
vs U.S.
- usgal/mi
The mpgUS
, mpgU.S.
, USgal/mi
vs U.S.gal/mi
, km/L
, L/100 km
and L/km
variants work within combinations also (making 36 combinations in total).
Power
Watts, kilowatts, milliwatts, etc. are supported. As is horsepower (English & metric). Use standard abbreviations as input code (lower case hp for horsepower, for example)
Population density
unit
code
(alternative)
notes
combinations
inhabitants per square kilometre
PD/sqkm
PD
stands for population density, i.e. humans (inhabitants)
- PD/sqkm PD/sqmi
per square kilometre
/sqkm
Used when the word 'inhabitants' would be inappropriate.
- /sqkm /sqmi
inhabitants per hectare
PD/ha
- PD/ha PD/acre
per hectare
/ha
- /ha /acre
inhabitants per square mile
PD/sqmi
PD
stands for population density, i.e. humans (inhabitants)
- PD/sqmi PD/sqkm
per square mile
/sqmi
Used when the word 'inhabitants' would be inappropriate.
- /sqmi /sqkm
inhabitants per acre
PD/acre
- PD/acre PD/ha
per acre
/acre
- /acre /ha
'per' units: kg/hl
When using a slash (/
), a unit like kg/hl
is recognized as kilograms per hectolitre and will be converted with other mass/volume units.
{{convert|1000|kg/hl}}
→ रुपांतरण त्रूटी: "kg/hl" एकक अनोळखी आहे
Units of difference
When a number is the measurement for a difference, one conversion is done. This may occur in temperatures (°C, °F, K). Compare this to a range, when two conversions are done.
The only available units of difference are: |C-change=
, |F-change=
and |K-change=
.
{{convert|10|C}}
→ १० °से (५० °फॅ), regular temperature
{{convert|10|C-change}}
→ १० °C (१८ °F), difference (e.g., "The temperature changed from 30 into 40 °C")
{{convert|10-15|C}}
→ रुपांतरण त्रूटी: मूल्य "10-15" अंकातच आवश्यक आहे, range (e.g., "The temperature is between 10 and 15 °C")
Consistently, into multiple units:
A rise of {{convert|10|C-change|F-change K-change}}
→ A rise of रुपांतरण त्रूटी: "F-change K-change" एकक अनोळखी आहे
Multiple units: 1 ft 5 in
In input
Base document साचा:Convert § Notes lists options for multiple unit input (like ft,in
). It can catch predefined sets only (units that can be subdivided; e.g., yd into ft):
{{convert|1|yd|2|ft|3|in}}
→ १ यार्ड २ फूट ३ इंच (१.६० मी)
{{convert|2|ft|3|in|cm}}
→ २ फूट ३ इंच (६९ सेंमी)
{{convert|1|lb|5|oz|g}}
→ १ पौंड ५ औंस (६०० ग्रॅम)
In output
Available multiple-unit output options predefined, like ftin
and ydftin
. The full list is at साचा:Convert § Notes.
{{convert|2|m|ftin}}
→ २ मीटर (६ फूट ७ इंच)
{{convert|2|m|ft in}}
→ रुपांतरण त्रूटी: "ft in" एकक अनोळखी आहे, using a space, returns the decimal point
Default behaviour, for comparison:
{{convert|2|m}}
→ २ मीटर (६ फूट ७ इंच)
See also:
Currency per unit: $/mi, €/km
Using currency symbols in a $ per unit value, you can convert the per-unit:
{{convert|10|$/mi|$/km}}
→ रुपांतरण त्रूटी: "$/mi" एकक अनोळखी आहे
You can set the currency in both values using |$=€
:
{{convert|10|$/mi|$/km|$=€}}
→ रुपांतरण त्रूटी: "$/mi" एकक अनोळखी आहे
It is not possible to convert the currency. So, this result (mixed currencies) is not possible: साचा:!mxt
Parameter list
प्राचल
किंमत
वर्णन
नोंदी
|abbr=in
in
Use symbol for first (left-hand side) unit
Symbol ('abbreviation')
|abbr=off
off
Use name for all units
Symbol ('abbreviation')
|abbr=none
none
|abbr=on
on
Use symbol for all units
Symbol ('abbreviation')
|abbr=out
out
Use symbol for right-hand side unit (default)
Symbol ('abbreviation')
|abbr=values
values
Show only input and output numbers, not units
Parts only
|abbr=~
~
Shows both unit name and symbol
Symbol & name
|adj=j
j
Join number and unit name using " " instead of a space
Join values
|adj=mid|…
mid
User-specified text after the input unit; sets adj=on
(adjective). Expects 1 unnamed parameter.
Word adding, adjective
|adj=on
on
Unit name is adjective (singular and hyphenated)
Grammar, adjective
|adj=pre|…
pre
User-specified text before input unit. Expects 1 unnamed parameter.
Word adding
|adj=ri0
ri0
Round input with precision 0
Rounding and significant figures
|adj=ri1
ri1
Round input with precision 1
Rounding and significant figures
|adj=ri2
ri2
Round input with precision 2
Rounding and significant figures
|adj=ri3
ri3
Round input with precision 3
Rounding and significant figures
|disp=b
b
Join input and output using " (...)" (default)
Join values
|disp=sqbr
sqbr
Join input and output using " [...]"
Join values
|disp=br
br
Join input and output using "<br/>"
Join values
|disp=comma
comma
Join input and output using ", "
Join values
|disp=or
or
Join input and output using " or "
Join values
|disp=number
number
Display output number only
Parts only
|disp=output number only
output number only
|disp=out
out
Display only output number and name/symbol
Parts only
|disp=output only
output only
|disp=preunit|…[|…]
preunit
Text to be inserted after value and before units, for both input and output, with optionally different text for output. Expects 1 or 2 unnamed parameters.
Word adding
|disp=table
table
Output is suitable for a table cell with align="right"
Table columns
|disp=tablecen
tablecen
Output is suitable for a table cell with align="center"
Table columns
|disp=unit
unit
Display input name/symbol only (not input number, not output)
Parts only
|disp=unit2
unit2
Display output name/symbol only (not input; not output number)
Parts only
|disp=x|...
x
Join input and output using user-specified text
Word adding
|comma=5
05
Only use comma for thousands separator if 5 or more digits
Number format
|comma=gaps
gaps
Use gaps (space), not comma, for thousands separator
Number format
|comma=gaps5
gaps5
Use gaps (space), but only if 5 or more digits
Number format
|comma=off
off
No thousands separator
Number format
|frac=N
N
Show imperial number in fractions, denominator=N
Number format, fraction
|lk=in
in
Link left-hand side unit name or symbol
Unit link
|lk=on
on
Link all unit names or symbols (but not twice for the same unit)
Unit link
|lk=out
out
Link right-hand side unit name or symbol
Unit link
|order=flip
flip
Inverts order of input, output measurements (conversion first)
Order
|round=5
05
Rounds calculation to the nearest multiple of 5
Rounding and significant figures
|round=25
25
Rounds calculation to the nearest multiple of 25
Rounding and significant figures
|round=each
each
In a range, each number is rounded by the default rounding
Rounding and significant figures
|sigfig=N
N
Round output number to N significant figures (N is a positive integer)
Rounding and significant figures
|sortable=in
in
Output numeric hidden sort field for use in a sortable table (based on input)
Table sort
|sortable=on
on
|sortable=out
out
Output numeric hidden sort field for use in a sortable table (based on output)
Table sort
|sp=us
us
Use U.S. spelling (like "meter" instead of default "metre")
Spelling U.S. names
|spell=in
in
Spell input number in words
Spelling numbers
|spell=In
In
Spell input number in words with first letter uppercase
Spelling numbers
|spell=on
on
Spell input and output numbers in words
Spelling numbers
|spell=On
On
Spell input and output numbers in words with first letter uppercase
Spelling numbers
|$=€
$
Replace $-sign with a currency sign, for example in $/acre
(no currency conversion happens)
Cost per unit
|debug=yes
yes
Debugging only. In a sortable table: show the normally hidden sort key
Table sort
|abbr=comma
comma
Deprecated. Use |comma=off
Number format
|abbr=mos
mos
Deprecated. Use |x| or |by|
Range format
|adj=1
01
Deprecated. Do not use. No need to deviate from regarding plurals
Plural or singular
|adj=flip
flip
Deprecated. Use |order=flip
Order
|adj=nocomma
nocomma
Deprecated. Use |comma=off
Number format
|disp=2
02
Deprecated. Use |disp=output only
Parts only
|disp=5
05
Deprecated. Use |round=5
Rounding and significant figures
|disp=flip
flip
Deprecated. Use |order=flip
Order
|disp=flip5
flip5
Deprecated. Use |order=flip |round=5
Order, rounding
|disp=nocomma
nocomma
Deprecated. Use |comma=off
Number format
|disp=u2
u2
Deprecated. Use |disp=unit2
Parts only
|near=5
05
Deprecated. Use |round=5
Rounding and significant figures
Deprecated options
साचा:Convert/doc/deprecations list
TemplateData
यथादृश्यसंपादक व इतर साधनांसाठी वापरण्यात येणारे हे टेम्प्लेटडाटा दस्तावेजीकरण आहे.
Convert साठी टेम्प्लेटडाटा
Converts measurements to other units.
प्राचल वर्णन प्रकार स्थिती value 1
the value to convert
आकडा ऐच्छिक from unit 2
ओळ ऐच्छिक to units 3
the unit to convert into
ओळ ऐच्छिक precision or suffix 4
significant digits after decimal dot or, if negative, exponent of ten
आकडा ऐच्छिक link units lk
“on” all, “in” input, “out” output or “off” no units
- अविचल
- off
ओळ ऐच्छिक abbreviation abbr
display for the units: “on” unit symbols, “off” all unit names in full words, “in” input unit symbol, “out” abbreviated output units, “values” no units at all
- अविचल
- out
ओळ ऐच्छिक spelling sp
“us” display U.S. spelling of unit names
ओळ ऐच्छिक adjective adj
adjective form (singular unit name appended by hyphen) “on” or “mid” to put conversion at end
ओळ ऐच्छिक conversion disp
display conversion result: “or” after ‘or’, “x” with custom prefix and suffix, “b” in parentheses, “table”/“tablecen”, “output only” alone, “output number only” alone and without unit, “unit” not at all but input unit; if the value is a number it is used as precision
- अविचल
- b
ओळ ऐच्छिक ordering order
“flip” returns converted value first, input value second.
ओळ ऐच्छिक significant figures sigfig
number that sets the number of significant figures
आकडा ऐच्छिक rounding output round
“5” rounds the output number to nearest multiple of 5, “25” to nearest multiple of 25, “each” rounds each number in a range
ओळ ऐच्छिक thousands separator comma
Sets or suppresses thousand separator in the numbers. “off” = no separator; “gaps”: use space not comma; “5” and “gaps5”: only add separator when number > 5 positions (10,000 or more)
- अविचल
- on
ओळ ऐच्छिक sort key sortable
“on” generates a hidden sort key
ओळ ऐच्छिक
See also